2ã€Support chips:                          Â
Chip type | Software code&
     Controller type | Lamps/(MAX) | Note |
LPD6803,D705,1101,6909, 6912 | T-1000-6803 | 2048 pixels | |
LPD8806,LPD8809 | T-1000-8806 | 2048 pixels | |
TM1803,TM1804,TM1809,TM1812 | T-1000-TM | 2048 pixels | TM1804 and TM1809 are divided into high and low |
TM1903,TM1904,TM1909,TM1912 | T-1000-TM19 | 2048 pixels | |
UCS6909,UCS6912,UCS7009,UCS5903 | T-1000-UCS-32 | 2048 pixels | |
UCS1903,UCS1909,UCS1912 | T-1000-UCS-256 | 2048 pixels | 1903 and 1909 are divided into high and low |
UCS3903 | T-1000-UCS-1024 | 2048 pixels | |
DMX512 | T-1000-DMX | 170/512 pixels | Compatible with standard DMX512 |
WS2801,WS2803 | T-1000-WS | 2048 pixels | |
WS2811 | T-1000-WS2811 | 2048 pixels | WS2811 be divided into high and low |
DS189 | T-1000-DS189 | 2048 pixels | |
TLS3001,TLS3002,TLS3008 | T-1000-TLS | * pixels | |
P9813 | T-1000-P9813 | 2048 pixels | |
SM16715 | T-1000-SM16715 | 2048 pixels | SM16715 be divided into high and low |
SM16716 | T-1000-SM16716 | 2048 pixels | |
BS0901,BS0902 | T-1000-0901 | 2048 pixels | |
BS0815 | T-1000-0815 | 2048 pixels | |
3ã€Definition of printing:            Â
Buttons | Meaning |
SET | Save Settings ( to save current settings file and the playback speed )。 |
MODE | Change programs |
SPEED+ | Speed up | Press speed+ and speed- at the same time the program will play circularly. |
SPEED- | Speed down |
                          Â
DC5V | +5V power input |
GND | Power GND input |
7.5-24V | +7.5-24V power input |
POWER | Power indicator |
ERROR | Error indicator |
SDå¡SD CARD | SD card slot |
TTL signal(245/spi signal):        RS485 signal.
Â
 Â
  Â
  Â
  Â
  Â
 Â
 Â
  Â
  Â
  Â
  Â
 Â
 Â
  Â
  Â
  Â
  Â
 Â
Â
CLK | Clock signal | B | Signal A / DMX+ |
DAT | Data signal | A | Signal B / DMX- |
GND | Signal ground | GND | Signal ground |
NOTE:For the TTL(SPI) signal, the controller signal ground must connect to the LED ground directly.
4〠Mode of connection
1. Multiple T-1000S controllers can be cascaded together and work synchronously.
2. T-1000S one TTL(SPI) signal and one RS485 signal port output,can control 2048 pixels/lamps;
3. When the chip for LED is single line chip just with data, then just need to be connected with DAT and GND of the controller. If the chip for LED is double line chip with DAT and CLK, then need to be connected with DAT, CLK, and GND of the controller. 4. If you need to use RS485 signal you need to connect controller A interface with LED lamps A (DMX+), controller B interface with LED lamps B(DMX-),
5. If you need to control a new IC type by the controller, software code mode is:T-1000-IC model.
5ã€Special parameters
  Â
 Memory card:
     Â
type:SD card(suggest using high-speed SD card)
     Â
Capacity:128MB—2GB Â
     Â
Format:FAT Â
     Â
Store file:*.led Â
 Â
Physical parameters: Â
     Â
Working temperature :-30℃—85℃ Â
     Â
Working voltage:DC5V / DC7.5-24V Â
     Â
Working power:1W Â
 Size:L165mm×W80mm×H30mm
 Weight:0.35KG
 Signal port:3pin connect port
 Note:
 Before copy files to SD card ,The SD card must be    formatted as FAT format
Package included:
 1x RF Controller