DC12V SMD5050-300-IR InfraRed 940nm | 850nm LED Light Strips, 60LEDs 14.4W Per Meter LED Tape NOTE: 1) The Infrared LED Strip is invisible light 2) To put the IR strip under the Camera with Night Vision (NO IR filter), you can see red spot Technical Specification Wattage 14.4W/Meter Voltage 12V DC Beam Angle 120° Dimming Yes LED Type SMD5050 Strip Section 3LED per 2inch WxH 10x2(mm) LED QTY.: 60LED/Meter Length Available 0.5 to 5 Meter Available Color 850nm and940nm Protection Grade Non-waterproof, IP65, IP67, IP68 PCB Background White Other Features Item DC12V SMD5050-300-IR InfraRed (850nm/940nm) Tri-Chip Flexible LED Strips 60LEDs 14.4W Per Meter Weight 0.15kgs/roll for non-waterproof; 0.25kgs/roll for IP65/IP67; 0.5kgs/roll for IP68. PCB Backing Adhesive backing for Non-waterproof and waterproof IP65,extra rubber mounting clips provide for IP67 and IP68 (2pcs every meter). Lead Single color strip has two contacts(V+,V-) and is Polarity Sensitive. Pre-wiring 20cm(8'') Red-Black lead wire is pre-soldered at one end of the strip Applications *For surveillance or security *For Night Version Light *For the multitouch display Features *Can be cut into 3-LED segments *Adhesive backing *12VDC Operation *Dimmable - See our Dimmer Selection Safty Tips *Always disconnect power supply before cutting/connecting LED Light Strips. *Do not crimp strip tape, attempt to bend strips width-wise, or length-wise to a radius less than 15mm *Do not connect LED Light Strips directly to 120V AC power. *Apply power to test LED Light Strips before mounting.
